1.With these system input and output devices are located outside the system unit.
(1) Desktop system (2) Personal digital assistants (3) Smartphone
(4) laptop computer (5) None of these
2.A byte is formed by a group of :
(1) 4 bits (2) 8 bits (3) 12 bits (4) 16 bits (5) None of these
3.Which of the following is not a binary code ?
(1) EBCDIC (2) ASCII (3) CISC (4) Unicode (5) None of these
4.This coding system allows non-English characters and special characters to be represent (4)
(1) ASCII (2) Unicode (3) EBCDIC (4) ANSIC (5) None of these
5.On the motherboard, the connection points for chips are referred to as :
(1) slots (2) sockets (3) ports (4) lines (5) None of these
6.Tiny circuit-boards etched onto squares of sand-link material called silicon are called:
(1) buses (2) slots (3) sockets (4) chips (5) None of these
7.Integrated circuit must be mounted on……..which are then plugged into the motherboard.
(1) slots (2) pins (3) ports (4) carrier packages(5) None of these
8.Which of the following is a function of the control unit ?
(1)It provides pathways that support communication among the various electronic components.
(2)It directs the control single between the CPU and inputs and output devices.
(3)It performs fundamental math operations like addition, subtraction, etc.
(4)It uses the logic to compare two pieces of data.
(5)None of these
9.Pathways that support communication among the various electronic components on the system board are called
(1) bus lines (2) network lines (3) logic paths (4) gate ways (5) None of these
10.In a microcomputer system, the CPU is contained on a single chip called the :
(1) semiconductor (2) ALU (3) microprocessor(4) Control Unit (5) None of these
Answer
(1) Desktop system (2) Personal digital assistants (3) Smartphone
(4) laptop computer (5) None of these
2.A byte is formed by a group of :
(1) 4 bits (2) 8 bits (3) 12 bits (4) 16 bits (5) None of these
3.Which of the following is not a binary code ?
(1) EBCDIC (2) ASCII (3) CISC (4) Unicode (5) None of these
4.This coding system allows non-English characters and special characters to be represent (4)
(1) ASCII (2) Unicode (3) EBCDIC (4) ANSIC (5) None of these
5.On the motherboard, the connection points for chips are referred to as :
(1) slots (2) sockets (3) ports (4) lines (5) None of these
6.Tiny circuit-boards etched onto squares of sand-link material called silicon are called:
(1) buses (2) slots (3) sockets (4) chips (5) None of these
7.Integrated circuit must be mounted on……..which are then plugged into the motherboard.
(1) slots (2) pins (3) ports (4) carrier packages(5) None of these
8.Which of the following is a function of the control unit ?
(1)It provides pathways that support communication among the various electronic components.
(2)It directs the control single between the CPU and inputs and output devices.
(3)It performs fundamental math operations like addition, subtraction, etc.
(4)It uses the logic to compare two pieces of data.
(5)None of these
9.Pathways that support communication among the various electronic components on the system board are called
(1) bus lines (2) network lines (3) logic paths (4) gate ways (5) None of these
10.In a microcomputer system, the CPU is contained on a single chip called the :
(1) semiconductor (2) ALU (3) microprocessor(4) Control Unit (5) None of these
Answer
QUE | ANS | QUE | ANS |
1 | 1 | 6 | 4 |
2 | 2 | 7 | 4 |
3 | 3 | 8 | 2 |
4 | 2 | 9 | 1 |
5 | 2 | 10 | 3 |
No comments:
Post a Comment